Air-energy heat pump heating is easily misunderstood by everyone

In the heating industry, as people pay more attention to environmental protection, energy saving, safety and other issues, the demand for clean heating equipment is getting higher and higher. In recent years, under the strong promotion of the "coal to electricity" policy, air-energy heat pump heating has become one of the most popular green energy equipment. Due to the continuous improvement of technology, air-energy heat pumps have shown strong performance and have promoted more and more air-energy heat pump users. Although the application of air-energy heat pumps is becoming more and more extensive, many users are not clear about air-energy heat pumps.

1. Does the air-energy heat pump equipment need to be controlled by a dedicated person when it is running?
The air-energy heat pump does not require a dedicated person to control it during operation. The equipment itself has strong intelligent technical support and uses electricity as the only energy source, not to mention the cumbersome processes such as pouring coal slag. The air-energy heat pump has a built-in electronic chip, and the entire unit can be intelligently controlled. Customers only need to set the initial relevant parameters, and the heat pump equipment can run automatically. When you need to adjust the temperature and select the operating mode, you can adjust it manually on the panel, or you can control it through the smart APP connected by WIFI, control the operating status of the system anytime, anywhere, and according to your living habits and needs for warming time and temperature.

2. Can the air energy heat pump equipment still operate when the ambient temperature reaches 0℃?
According to regulations, the air energy heat pump needs to reach an energy efficiency ratio of more than 2.0 at -12℃. When heating can also operate normally at -25℃, such air energy heat pumps can be sold on the market, so when the environment reaches 0℃, the air energy heat pump equipment can also operate normally. To make the air energy heat pump equipment more energy-efficient and serve users more widely, various breakthroughs have been made in technology, using full frequency conversion technology and injection enthalpy technology, combined with waste heat recovery technology, to effectively solve the bottleneck of instability and low energy efficiency under cold climate conditions, and even -35℃ environment can operate normally.

3. Does the air energy heat pump equipment need to be installed in a dedicated machine room?
The air energy heat pump equipment must absorb free heat energy from the air to achieve indoor heating. Therefore, the air energy heat pump unit needs to be installed outdoors, not in a dedicated machine room. The principle of the air energy heat pump is to drive the compressor at low power, absorb low-temperature heat energy from the air, and then convert the absorbed low-temperature heat energy into high-temperature heat energy, and then transport the obtained high-temperature heat energy to the indoor heating. Generally speaking, the installation of air-energy heat pump equipment must meet the conditions of smooth ventilation, and then obtain more heat energy. It can be installed on the roof or in the open space around the house. The elevator apartment can be installed in the external position of the central air conditioner or on the balcony. Of course, the installation of air-energy heat pump should also consider reliability and aesthetics.