How To Descale An Air-energy Water Heater?
Dec 21, 2024
1. Descaling with a high-frequency electronic descaling instrument. This method requires cutting the pipes during installation. The installation is cumbersome and requires a large amount of work. Moreover, the suspended matter in the water will cause the system to fail at the electrode. The new anti-scaling product, the quantum ring, can produce the same natural frequency as the minerals in the water, and resonate to precipitate them. The effect is good, but the cost is high, which is difficult for ordinary consumers to accept.
2. Descaling with softened water. Softened water is a way to prevent scale. Generally, hospitals with high requirements for water quality or strict requirements for continuous water supply adopt this method. Equipment is added to regularly replenish mineral salts. This method is complicated to operate and has high maintenance costs.
3. Descaling with permanent magnets. A circular permanent magnet is added and placed on a straight pipe. The magnetic field passing through the pipe is used to treat the water in the pipe. It is used in places with large pipes. Generally, it is configured for water quality, and may not work after changing the water quality. The product is unstable.
4. Adding antiscaling agents. Antiscaling agents have certain side effects on the human body, and professional dosing equipment is required. It requires a dedicated person to be responsible and is not widely used.
5. The principle of electronic induction water treatment is to generate an induction electromagnetic field in the water with a frequency and intensity that changes according to a certain rule through the host. The electromagnetic field causes the scaling ions in the water to combine into a large number of aragonite nuclei. When the mineral content in the water exceeds the saturated solubility of the water, the scaling ions will precipitate and preferentially grow on these nuclei to form aragonite crystals, replacing the precipitation of calcite crystals. The aragonite crystals are soft and flocculent and can be easily washed away by water. This method is easy to install, does not require cutting and drilling, does not require replacement of electrodes and maintenance, consumes very little power, and is a relatively good solution. However, due to different opinions among manufacturers, the application is limited in promotion.
It is very important to clean the air-energy water heater, because only when the dust inside is cleaned away can it be used better. In addition, for how to describe the air-energy water heater, the methods you introduced above are more useful. People who use air-energy water heaters must pay attention to cost performance when purchasing.







